- No products in the cart.
Product Type : Back Light LED Logo
No Soldering Required
Sits Flush In Place Of the Current Apple Logo
The Logo Lights Up Whenever Your Phones Back Light In Use
Our LED Modification Flex Is a Simple & Good Looking Way To Modify Your iPhone
Love the Way Your Macbooks Apple Logo Lights Up? Now You Can Do this On Your iPhone!
The LED Draws Power Directly From the Phone Back Light, This Means Your phone Will Last Just As Long As It Did Before The Modification
How To Install
Fitting Into The Rear
- Remove LCD Assembly
- Remove Battery
- Heat the Old Apple Logo To Soften The Adhesive, Most Of the Time The Logo Will Press Or Pry Out But If Its a Little Tricky You Can Punch Out From The Rear
- Glue The Logo In Place (You Can Use Super Glue But Ensure You Have Acetone Handy To Remove Any Residue After Completing The Work)
- Re-Fit The Battery
Connecting To The LCD
- Remove the Sticker Protecting the Backlight Contacts On the iPhones LCD (Located Just Under the Right Most Screw Holding The Earpiece Bracket In Place)
- Remove The Middle & Right Screw From The Earpiece Bracket
- Slide The Cable Under the Bracket (Between The Back Of The Camera & Bracket)
- Re-Fit The 2 Screws
- Carefully Line Up The Contacts On the LED Flex With The Outside Contact On the Backlight & Secure In Place Using the Provided Black Strip
- Hold In Place Fit The 2 Foam Pads Provided (One On Next To The Other) On Top Of The Tape Directly Above The Contacts
- Close The Phone
In the Box
1 x brand new Intelligent Back Light LED Logo For Apple iPhone 6S.
Due to the nature of this product we do not provide any warranty, for more info read our Replace and Refund Policy.
If Selected Color Is Not Available. Random Color Will Be Dispatched Depending Upon Availability.
Blue, Red, White, Yellow